A sump pump protects against water entering your basement or lower level, protecting both personal belongings and foundation. As it operates around-the-clock 365 days per year, its purpose is to avoid an unexpected flood from happening, potentially causing extensive and expensive damage. When your sump pump malfunctions, clogs up, or fails altogether, professional plumber services should be sought for repair services immediately.
Before installing a replacement sump pump and pit, a plumber will assess the existing one to make sure it can fulfill its purpose effectively. This involves identifying where your basin will be situated, where drainage lines run from it, how your pit connects with house plumbing and drainage system and more. A professional will also verify whether the float switch has been correctly installed so you can pump discharge line outside without creating backup problems.
Sump pumps serve a vital purpose: pumping excess water out of pits and away from properties. But sometimes their capacity can become compromised due to build-up of dirt or power outage; troubleshooting such issues is often difficult during inclement weather or heavy rainfall.
No matter if it’s reset your sump pump, remove its float to inspect for wear or replace a dead battery – these tips can help ensure that your sump pump remains in good working order. It is advised to have your sump pump replacement Orange serviced regularly by an expert plumber, especially during heavy rainfall or flooding conditions.
If your sump pump is connected to an extension cord, ensure it is plugged into a ground fault circuit interrupter (GFCI) outlet instead of just any old outlet to protect it from sudden electrical surges that might set off its alarm and force the shutoff of your sump pump. This will protect its operation.
Examine the sump pit regularly for signs of wear and dirt that could cause the float to jam and prevent starting of the pump. Pour some water into the pit occasionally to test operation of its pump.
Drainage pipes serve to transport water from the sump pit out of the basement. They are typically made of PVC and designed to extend to an external location for safe discharge of excess water. Their length depends on where existing water, sewer and utility lines exist and must be at least 8 inches (20 centimeters) away from their respective pipes, with any pump located close to a GFCI outlet for maximum effectiveness.
If your sump pump has been continuously running and cannot be stopped, a clogged float or check valve could be to blame. Such issues could set off a never-ending cycle of pumping that could compromise the foundation of your home and possibly destabilize it over time.
