A sump pump is an essential piece of flood protection equipment. It can save your West Caldwell home from flood damages by taking the water out of the basement or crawl space when it starts to accumulate.
The installation of a sump pump is a fairly simple process. However, it’s important to keep an eye on the system to make sure it’s working properly.
Sump Pit
If you are looking for a way to prevent flooding in your basement or crawl space, it’s best to invest in a sump pump installation. This is a simple and effective flood prevention solution that can save you thousands of dollars in damage repairs in the event of a water emergency.
Usually, the cost of a sump pump installation depends on several factors including the type of flooring that you have in your home, your location, and the size of your pump. It can range anywhere from $700 to $1,700.
The main function of a sump pump is to take out excess water that has accumulated in the sump pit and eject it from your basement or crawlspace. Aside from that, a sump pump also protects your property from damages during power outages and other unexpected problems.
Pressure Sensor
When water is in your basement or crawl space it can cause damage to the foundation of your home. This is why having a properly installed sump pump system in your West Caldwell, Boise or Nampa home is a necessity.
There are two types of pumps that can be used: submersible and pedestal. Both of these pumps work by collecting water in a pit and using centrifugal force to push the liquid out of the system and into an area where it can drain safely, such as a municipal storm sewer or a dry well.
The majority of residential sump pumps have either a pressure sensor or float activator that turns the pump on automatically when water builds up. This float activated sensor is similar to the one that you have in your toilet tank; it has a ball that floats on top of the water as it rises, moving an arm that triggers the pump.
Check Valve
If your sump pump has a check valve installed, it will help keep water from flowing back into the discharge pipe when the motor is turned off. This will save you money on electricity, and prolong the life of your pump.
There are several different types of check valves, but the most common is the swing/gravity closing type. This type of valve opens by gravity and closes by the weight of water pushing on the flapper.
You can get these at a home improvement store or online. It’s best to measure the size of your drainage pipe and get a matching valve.
You can install a sump pump check valve vertically in the discharge pipe rising out of the sump pump pit, or horizontally in a section of the pipe. Make sure the valve fits well and is located in an area where you can reach it easily.
Installation
Sump pumps are used to move accumulated water that builds up in the lowest part of a basement or crawl space. They are commonly installed in homes that sit below the water table, or in areas where flooding can occur due to high rains and seasonal snowmelt.
The pump moves the accumulated water from the pit into pipes that carry it away to drain in an area outside of your home. It also has a check valve that prevents water from flowing back into the sump pit.
A sump pump can save your home from serious water damage and mold growth. It’s a smart investment to make in a home with a basement or crawl space.
