Sump pumps are essential tools in flood-prone areas to keep your home dry and protected from basement flooding. Repairing a flooded basement can be expensive; so to save yourself the expense, install a sump pump in your home today!
When deciding where to install a sump pump, there are several factors to consider: the location of the pump, whether it will go in an outdoor well pit or boiler pit, and whether or not there are any environmental concerns that need addressing. Before making your decision, ask yourself some questions to ensure the installation goes smoothly.
Installation Process
Sump pumps are essential devices that pump away water from basements. Installing one correctly can prevent costly flooding in the future.
Before you begin, ensure the appropriate location for your pump. It should be located in the lowest point of your basement so it can efficiently pump away water away from your home.
Once you’ve selected a location for the sump pump, dig a hole where it should go. Depending on the condition of your foundation, you may need to use either a jackhammer or sledge hammer for this step.
Once the hole is ready, fill it with concrete mixture and cover it with a layer of sand. This helps the concrete set and cure, so make sure the weather is dry and not rainy when doing this task.
Pump Types
A sump pump is an essential element in basement waterproofing systems. It sits atop a pedestal over an area where water collects, pushing it away from the foundation through its discharge pipe.
When looking for a pump, there are plenty of options to suit any budget. When making your decision, factor in factors like construction quality, horsepower output, additional features and switch type.
Sump pumps made of cast iron or stainless steel offer superior durability, shielding the motor and other inner components from storm damage.
Another essential factor to consider when purchasing a sump pump is its motor size. This measurement determines how much water can be moved per hour by the pump.
Furthermore, you should take into account the discharge head (lift pressure) of a pump when selecting one for your needs. You can usually find this information on product packaging or Amazon.
Safety Measures
Before installing an exterior sump pump near me, homeowners should take certain safety precautions to guarantee its smooth functioning. Doing this could help them avert potential issues with the system and protect their home from floods in the future.
Homeowners should test the pump twice annually to guarantee its proper operation. To do this, slowly pour water into the pit until you hear the pump activated by activating its switch.
If the water doesn’t drain as quickly as expected, your sump pump may need repair or replacement. Also, inspect the discharge pipe to make sure it’s connected securely and directed away from the foundation of your house.
Another essential safety measure is to disconnect the drain hose outside during cold weather. Doing this prevents ice from blocking up the discharge line and sending water back into the sump pit.
Cost
If your home is frequently affected by water, installing a sump pump is absolutely essential. Without one, your house could be vulnerable to flooding and extensive damage.
The cost of installing an exterior sump pump system varies based on its location and type. A new system could range in cost from $900 to $2,200.
In addition to a pump, you may also require an effective drainage system. This usually consists of a French drain for carrying water to your pit and an outlet line for waste water disposal.
Another crucial component of an exterior sump pump is its cover. This should be airtight to prevent radon gases and moisture from entering your home.
Installing a check valve on the discharge pipe of an irrigation pump will prevent water from backing up into the sump basket when it shuts off, saving homeowners money in the long run.
